Increase your solar panel output up to 30% with this new photovoltaic charge controller. Patent pending technology gives this charge controller the capability to use all the power your panels are capable of putting out. You could actually consider using less panels! When your batteries are low and you have sun, you will get maximum power out of your panels. Under boost conditions it is like having an extra solar panel, but without the cost and the extra weight.

The SB2000E comes with LCD display and is flush mounted (RV style). Optional conduit box for surface mounting is available.

Specifications:

Output Current Rating	25 Amp Maximum (Output current limit 25.0 ± 0.5 A)
Nominal System Voltage	12 VDC
PV Open Circuit Voltage	30 vdc Maximum
Standby Power Consumption	17 mA typical
Charge On Power Consumption	70 mA typical
Charge Algorithm	Fully automatic two stage charge, Bulk & Constant Voltage. A third manually actuated Equalize charge function is included to periodically condition lead-acid batteries.
Charge Voltage Setpoint Range	13-16 vdc (14.0 vdc initial factory setting)
Equalization Voltage	Charge voltage setting + 1.2 vdc
Temperature Compensation	Optional temperature sensor adjusts charge voltage setpoint based on measured battery temperature.
Power Conversion Efficiency	95% @ 15 Amp output
Panel Dimensions	11.75cm x 16.19cm x 4.76cm (L x W x D)
Front Panel Displays	LCD digital display shows PV module input current, output charge current and battery voltage. Charge status LED shows present charge mode and battery state of charge.

Blue Sky Energy Solar Boost 2000E Charge Controller.

* Unit works best with optional Battery Temperature Sensor SB-BTS

CALL FOR A FREE QUOTE TODAY!

EvolveGreen.Ca Renewables that work for you!

BuyLedBulb.com Lighting the future!